When using the green sand casting machine, the following precautions should be taken

来源：Guangdong Zoomzu Machinery Equipment Co., Ltd 发布日期:2018-11-20 浏览：3135

When using the green sand casting machine, the following precautions should be taken:

1. Adhere to basic operating procedures: Do not start equipment with load, and do not use equipment beyond its capacity; After the equipment is started, the operator shall not leave the work post without permission, and shall concentrate and operate carefully according to the process procedures.

2. Pay attention to the operation of the equipment: if there is poor lubrication, loose fasteners, damaged parts, etc., the machine should be stopped immediately for handling. ‌

3. Pre operation inspection: including whether the observation door of the vortex chamber is tightly closed and whether the direction of the impeller selection is correct. ‌

4. Material requirements: The feeding particle size of the material should meet the specified requirements and should not be too large to avoid damage to the equipment. ‌

5. Continuous and uniform feeding: The sand making machine should maintain continuous and uniform feeding to avoid blockage and motor burnout. ‌

Following these precautions can ensure the normal operation of the green sand casting machine and extend its service life.